Skip to main content

safety

Safety Information​

Please read all documentation before using the product. This guide contains important information to prevent injury or property damage and to ensure safe operation.

The warning statements in this guide use the following categories.

Meaning of warning labels​

LabelDescription
DangerImminent hazardous situation which, if not avoided, will result in death or serious injury.
WarningPotentially hazardous situation which, if not avoided, could result in death or serious injury.
CautionPotentially hazardous situation which, if not avoided, may result in minor or moderate injury, or property damage.

Meaning of symbols​

SymbolDescription
ProhibitedIndicates actions that are prohibited when handling the product.
WarningIndicates precautions against hazards such as fire, explosion, or high temperatures.
MandatoryIndicates actions that must be performed as instructed.

Safety precautions​

Danger​

SymbolDescription
ProhibitedDo not disassemble, modify, or repair the product, and do not place it in a fire. Doing so may cause electric shock, fire, burns, or damage due to short circuits or overheating.

Warning​

SymbolDescription
WarningIf an overvoltage, overcurrent, or incorrect connection occurs, turn off the product and disconnect it from peripheral equipment. Failure to do so may result in electric shock, fire, burns, or damage.
WarningIf you notice abnormal sounds, smells, overheating, smoke, or deformation, turn off the product and disconnect it from peripheral equipment. Failure to do so may result in electric shock, fire, burns, or damage.
WarningIf foreign objects or liquids enter the product, turn off the product and disconnect it from peripheral equipment. Failure to do so may result in electric shock, fire, burns, or damage.
ProhibitedDo not touch the product with wet hands. Electric shock may result.
WarningTurn off the power of peripheral equipment before connecting it to this product. Failure to do so may result in electric shock, fire, burns, or damage.
ProhibitedDo not touch the product during a lightning storm. Electric shock may result.
MandatoryWhen handling cables, follow these precautions to avoid electric shock, fire, burns, or damage:
• Fully insert connectors when connecting
• Hold the connector housing (not the cable) when plugging or unplugging
• Confirm polarity and connection points before connecting
• Do not pull, bend, or twist cables excessively
• Do not use cables while bent
• Do not use damaged (exposed or broken) cables
• Do not knot cables
• Do not modify cables

Caution​

SymbolDescription
ProhibitedDo not touch the metal portions of connectors directly. Static electricity or contamination may cause damage.
ProhibitedDo not drop the product or subject it to strong shocks. Damage may occur.
WarningDisconnect the product from peripheral equipment before moving it. Damage may occur.
WarningDepending on the environment, the surface of the product may become hot during operation. This is not a malfunction, but avoid prolonged direct contact to prevent low-temperature burns.

Precautions for Use​

Handling the product​

  • Do not turn off the power while the product is operating. Doing so may cause a malfunction.
  • Use the product only within a temperature range of 0–40 °C and relative humidity of 80% or less (non-condensing).
  • Do not use the product in locations exposed to water or moisture.
  • Do not use the product in dusty environments.
  • Do not use the product in locations where corrosive gases are present.
  • Do not use the product in direct sunlight.
  • Do not use the product near equipment that generates electrical noise.
  • Do not use the product in locations subject to severe mechanical shock or continuous vibration.
  • Do not use the product in any environment unsuitable for precision electronic equipment.

Storage​

Storing the product​

  • If the product will not be used for an extended period, place it in the original shipping carton and store it in a location with an ambient temperature of –10–40 °C and relative humidity of 80% or less (non-condensing), away from direct sunlight.

Disposal​

Disposing of the product​

  • Dispose of the product as industrial waste in accordance with applicable laws and regulations.

Transportation​

Transporting the product​

  • When transporting the product, use the original shipping carton and adequate cushioning material. Inadequate packaging may cause damage during transport.

Cleaning​

Cleaning the product​

  • If the product becomes dirty, wipe it with a soft cloth. Do not use organic solvents (such as benzene) that may damage the product.