Introduction
Purpose of This Document
This document is the user manual for MicroPeckerX Log Editor.
By using this product, you can create log files used for the MicroPeckerX log replay function.
How to Use This Document
Each chapter explains feature overview and operation methods with actual screens and button names.
If you have questions, please refer to the FAQ or contact us.
Terminology
The terms used in this document are described below.
| Term | Description |
|---|---|
| CAN | Abbreviation of Controller Area Network. Communication protocol developed for in-vehicle networks. International standard defined by ISO 11898. |
| CAN FD | Abbreviation of CAN with Flexible Data-rate. Extended CAN protocol that enables higher speed and larger data transfer. Standardized as ISO 11898-1:2015. |
| LIN | Abbreviation of Local Interconnect Network. Communication protocol developed to reduce costs of in-vehicle networks. International standard defined by ISO 17987. |
| Ch | Abbreviation of Channel. Refers to a physical or logical communication path. In MicroPeckerX CAN FD Analyzer, there are two CAN buses. In MicroPeckerX LIN Analyzer Plus, there is one LIN bus and one DIO/AD interface. Two channels can send/receive data independently. |
| Log Replay | Function to reproduce/replay contents using acquired or created log files. |
| Log Record | One log entry included in an acquired or created log file. |
Notes on Using This Document
- Reproduction, modification, or translation of part or all of this document without the author's permission is prohibited, except where permitted by copyright law.
- Information and images in this document are based on the state at the time of writing and may differ from the latest product or product website content (wording, design, etc.).
- Company names and product names in this document are trademarks or registered trademarks of their respective companies.