Introduction
Purpose of This Document
This manual covers the USB driver for MicroPeckerX. Refer to it when you need to install or uninstall only the USB driver. Always run USB driver installation and uninstallation with administrator privileges.
How to Use This Document
Each chapter explains how to install and uninstall the MicroPeckerX USB driver. If you have any questions, check the FAQ or contact us.
Terminology
The following table explains the terms used in this document.
| Term | Description |
|---|---|
| USB driver | Software required to connect MicroPeckerX to a PC via USB. It is essential for the PC to properly recognize and communicate with the device. |
| DpinstCall.exe | Executable file that installs the USB driver. It is stored in the USBDriver folder. |
| Bus/D2XX Driver | Low-level driver for USB communication. It is used to control MicroPeckerX functionality. |
| VCP Driver | Driver that lets the PC recognize MicroPeckerX as a virtual COM port. |
| Administrator rights | Windows privilege level required to install or uninstall the driver. |
| Windows Driver Package | Sunny Giken Inc. USB driver package. Each version contains two drivers: “Bus/D2XX Driver” and “VCP Driver.” |
Before You Begin
- Do not reproduce, modify, or translate any part of this document without the author’s permission, except as permitted by copyright law.
- The information and images in this document are current at the time of writing and may differ from the latest products or product website content (such as wording or design).
- Company and product names mentioned in this document are trademarks or registered trademarks of their respective owners.