Python LIN Slave Simulation Program
Setting Up the Execution Environment
This section describes one way to prepare the sample program environment: create a virtual environment with venv, then build and install the sample in that environment.
Perform the following steps while the virtual environment is active.
- Change the current directory to the directory containing the source code.
- Run
python setup.py buildto build the Python wrapper sample. - Run
python -m pip install .to install the Python wrapper sample built in step 2. - Run
python mpx_lin_slvsample.pyto start the sample program.
Operation Specification
| Item | Description |
|---|---|
| CH1 | Operates in slave simulation mode. When a header with a specified ID is received, sends the response associated with that ID (see Response ID List for the specified IDs and responses). Also calls MPXGetLog every 10 ms to acquire logs and display them in the console. |
| CH2 | Not used |
Response ID List
The response ID list is as follows.
| ID | DL | Data (Hexadecimal) | |||||||
|---|---|---|---|---|---|---|---|---|---|
| D1 | D2 | D3 | D4 | D5 | D6 | D7 | D8 | ||
| 12H | 2 | 34H | BCH | ||||||
| 34H | 8 | 80H | 91H | A2H | B3H | C4H | D5H | E6H | F7H |
Log Display Details
| Item | Description |
|---|---|
| TIME | Displays the timestamp. |
| DIR | Displays the log direction. Rx: received log; Tx: transmitted log. |
| TYPE | Displays the log type. |
| ID | Displays the LIN ID in hexadecimal. |
| SBL | Displays the SyncBreak width. |
| DL | Displays the data length (0 to 64). |
| DATA | Displays data (D1 to D64) in hexadecimal. Data bytes are separated by spaces. |
| CS | Displays the checksum in hexadecimal. |
| WPL | Displays the wakeup pulse width. |
Sample Source Code
Source: MPXCtrl_LIN_SlvSample/mpx_lin_slvsample.py
import os
import sys
from pathlib import Path
if sys.platform == 'win32':
_dll_dir = os.add_dll_directory(
str(Path(__file__).resolve().parent)
)
import MPX_ADL_WR
import threading
import time
stop_event = threading.Event()
#read thread
def read_exec():
while not stop_event.is_set():
ret = MPX_ADL_WR.DispMonitor(serial, 1)
if not ret is None:
for i in range(ret[0]):
if ret[1 + i][4] == 'Header':
print('TIME:' + str(ret[1 + i][0]) + '[ms] ' + str(ret[1 + i][1]) + '[us]' +
' DIR:' + ret[1 + i][3] +
' TYPE:' + ret[1 + i][4] +
' ID:' + hex(ret[1 + i][5]) +
' SBL:' + str(ret[1 + i][6]) + '[bit]')
elif ret[1 + i][4] == 'Response':
data = ret[1 + i][8]
data_text = '\\'.join(hex(b) for b in data)
print('TIME:' + str(ret[1 + i][0]) + '[ms] ' + str(ret[1 + i][1]) + '[us]' +
' DIR:' + ret[1 + i][3] +
' TYPE:' + ret[1 + i][4] +
' ID:' + hex(ret[1 + i][5]) +
' DL:' + str(ret[1 + i][7]) +
' DATA:' + data_text +
' CS:' + hex(ret[1 + i][9]))
elif ret[1 + i][4] == 'Wakeup':
print('TIME:' + str(ret[1 + i][0]) + '[ms] ' + str(ret[1 + i][1]) + '[us]' +
' DIR:' + ret[1 + i][3] +
' TYPE:' + ret[1 + i][4] +
' ID:' + hex(ret[1 + i][5]) +
' WPL:' + str(ret[1 + i][10]) + '[ms]')
elif ret[1 + i][4] == 'Sleep':
data = ret[1 + i][8]
data_text = '\\'.join(hex(b) for b in data)
print('TIME:' + str(ret[1 + i][0]) + '[ms] ' + str(ret[1 + i][1]) + '[us]' +
' DIR:' + ret[1 + i][3] +
' TYPE:' + ret[1 + i][4] +
' ID:' + hex(ret[1 + i][5]) +
' DL:' + str(ret[1 + i][7]) +
' DATA:' + data_text +
' CS:' + hex(ret[1 + i][9]))
else:
print('TIME:' + str(ret[1 + i][0]) + '[ms] ' + str(ret[1 + i][1]) + '[us]' +
' TYPE:' + ret[1 + i][4])
pass
time.sleep(0.01)
ret = MPX_ADL_WR.MPXOpen()
if ret[0] != 0:
print('MPXOpen Error:' + str(ret[0]))
print('Serial No.')
for i in range(ret[1]):
print(' ' + str(ret[2][i]))
serial = ret[2][0]
print('MPX LIN INIT.')
ret = MPX_ADL_WR.MPXSampleLINInit(serial, 3)
if ret != 0:
print('LIN INIT error:' + str(ret))
print('MPX LIN Slave Set Simulation.')
ret = MPX_ADL_WR.MPXSampleLINSetSlaveSim(serial)
if ret != 0:
print('LIN Slave Set Simulation error:' + str(ret))
print('MPX MonitorStart.')
ret = MPX_ADL_WR.MPXMonitorStart(serial)
print('Start ReadThread...')
read_thread = threading.Thread(target = read_exec)
read_thread.start()
print('Monitoring...')
time.sleep(20.0) # メインスレッドだけ20秒待つ。read_threadは動き続ける
stop_event.set()
read_thread.join(timeout = 2.0)
ret = MPX_ADL_WR.MPXMonitorStop(serial)
if ret[0] != 0:
print('MonitorStop :Error' + str(ret[0]))
else:
print('MonitorStop :Time' + str(ret[1]) + '[ms]' + str(ret[2]) + '[us]')
ret = MPX_ADL_WR.MPXClose()
The processing flow of this source code is as follows.
- Open the Device
- MPXOpen() searches for MicroPeckerX devices and obtains their serial numbers.
- Initialize the Device
- MPXSampleLINInit() initializes the MicroPeckerX device identified by the obtained serial number.
- Configure Slave Simulation
- MPXSampleLINSetSlaveSim() configures the slave simulation responses.
- Start Monitoring
- MPXMonitorStart() starts monitoring.This also starts transmission of the responses configured in step 3.
- Start the Monitoring Thread
- DispMonintor() starts a thread that runs read_exec() to acquire logs periodically.
- Stop the Monitoring Thread
- stop_eventis set to terminate the thread that runs read_exec().
- Stop Monitoring
- MPXMonitorStop() stops monitoring.This also stops transmission of the responses configured in step 3.
- Close the Device
- MPXClose() closes the MicroPeckerX device identified by the obtained serial number.