Skip to main content
Version: Ver.4.10

For Safe Use

For Safe Use​

Before using this product, be sure to read all manuals. This document contains important information to prevent harm to users and others and to avoid property damage, and describes items that must be observed for safe use.

This document uses the following warning categories.

Meaning of Warning Labels​

DisplayDescription
DANGERIncorrect handling may result in death or serious injury, and the level of urgency is very high.
WARNINGIncorrect handling may result in death or serious injury.
CAUTIONIncorrect handling may result in injury or property damage.

Meaning of Symbols​

SymbolDescription
Prohibited markProhibited action in product handling
Caution markAttention mark for risks such as ignition, explosion, and high temperature
Mandatory markMandatory action mark based on instructions

Safety Precautions​

DANGER​

SymbolDescription
Prohibited markDo not disassemble, modify, repair, or throw this product into fire. Short circuits or heat generation may cause electric shock, fire, burns, or damage.

WARNING​

SymbolDescription
Caution markIn case of overvoltage, overcurrent, or incorrect connection, turn off the product and disconnect from peripherals immediately. Electric shock, fire, burns, or damage may occur.
Caution markIf abnormal sound, smell, overheating, smoke, or deformation occurs, turn off the product and disconnect from peripherals immediately. Electric shock, fire, burns, or damage may occur.
Caution markIf foreign matter or water enters the product, turn off the product and disconnect from peripherals immediately. Electric shock, fire, burns, or damage may occur.
Prohibited markDo not touch the product with wet hands. Doing so may cause electric shock.
Caution markWhen connecting peripherals and this product, perform connection with peripheral power turned off. Electric shock, fire, burns, or damage may occur.
Prohibited markDo not touch this product during a thunderstorm. Doing so may cause electric shock.
Mandatory markWhen handling cables, observe all of the following. Failure to do so may cause electric shock, fire, burns, or damage.
- Fully insert connectors
- Hold connectors when plugging/unplugging (do not pull cable itself)
- Confirm polarity and connection points before terminal connection
- Do not pull strongly or bend sharply
- Do not use in a bent state
- Do not use damaged cables (exposed core, broken wire, etc.)
- Do not use tied/kinked cables
- Do not process/modify cables

CAUTION​

SymbolDescription
Prohibited markDo not touch connector metal parts directly. Static electricity or contamination may cause damage.
Prohibited markDo not drop the product or subject it to strong impacts. Doing so may cause damage.
Caution markDisconnect the product from peripheral devices before moving it. Failure to do so may cause damage.
Caution markProduct surface temperature may rise depending on environment; this is not a failure. Do not touch continuously for a long time to avoid low-temperature burns.

Usage Notes​

Handling the Product​

  • Do not turn off the power while the product is operating. Doing so may cause a malfunction.
  • Do not use outside temperature 0°C to 40°C and humidity 80% or less (no condensation).
  • Do not use in wet or humid places.
  • Do not use in dusty places.
  • Do not use where corrosive gas is present.
  • Do not use under direct sunlight.
  • Do not use near equipment that may generate electrical noise.
  • Do not use in places with severe mechanical shock or constant vibration.
  • Do not use in environments unsuitable for precision electronic devices.

Storage​

Storage Method​

  • If not used for a long period, store in the original package in a place without direct sunlight, with ambient temperature -10°C to 40°C and humidity 80% or less (no condensation).

Disposal​

Disposal Method​

  • Dispose of this product as industrial waste in accordance with applicable laws and regulations.

Transportation​

Transportation Method​

  • For transportation, use the original package and cushioning material, and ship as precision equipment. Insufficient packaging may cause damage during transportation.

Cleaning​

Cleaning Method​

  • If the product becomes dirty, wipe with a soft cloth. Do not use organic solvents (such as benzine) that may alter the product.