For Safe Use

For Safe Use​

Before using this product, be sure to read all manuals and instructions. This document contains important information for use, and precautions you must follow to prevent harm to users and others, prevent property damage, and use the product safely.

In this document, safety precautions are indicated as follows.

Meaning of Warning Levels​

Display	Description
Danger	High-immediacy hazard that may result in death or serious injury if the product is handled incorrectly.
Warning	Hazard that may result in death or serious injury if the product is handled incorrectly.
Caution	Hazard or damage that may result in minor injury or property damage if the product is handled incorrectly.

Meaning of Symbols​

Symbol	Description
	Prohibited action in product handling
	Caution for risks such as ignition, explosion, or high temperature in product handling
	Mandatory action based on instruction in product handling

Safety Precautions​

Danger​

Symbol	Description
	Do not disassemble, modify, repair, or throw this product into fire. Short circuit or heat generation may cause electric shock, fire, burns, or damage.

Warning​

Symbol	Description
	In case of overvoltage, overcurrent, or incorrect connection, turn off product power and disconnect it from peripheral devices. Otherwise, electric shock, fire, burns, or damage may occur.
	If abnormal sound/smell, overheating, smoke, or deformation occurs, turn off product power and disconnect it from peripheral devices. Otherwise, electric shock, fire, burns, or damage may occur.
	If foreign matter or water enters the product, turn off product power and disconnect it from peripheral devices. Otherwise, electric shock, fire, burns, or damage may occur.
	Do not touch this product with wet hands. Risk of electric shock.
	When connecting peripheral devices and this product, make connections with peripheral device power turned off. Otherwise, electric shock, fire, burns, or damage may occur.
	Do not touch this product during thunderstorms. Risk of electric shock.
	When handling cables, follow these points. Otherwise, electric shock, fire, burns, or damage may occur. - Fully insert connectors when connecting - When unplugging/plugging cables, hold connector parts; do not pull cable itself - When connecting to terminals, verify polarity and connection points are correct - Do not pull strongly or bend sharply - Do not use while bent

• Do not use if damaged (exposed wire, broken wire, etc.)
• Do not use while tied in a knot
• Do not process/modify cables

Caution​

Symbol	Description
	Do not directly touch metal parts of connectors. Static electricity or contamination may cause damage.
	Do not drop the product or apply strong impact. Risk of damage.
	When moving this product, disconnect it from peripheral devices. Risk of damage.
	Depending on environment, product surface temperature may rise. This is not a malfunction. To avoid low-temperature burns, do not touch continuously for long periods.

---

Notes on Use​

Handling This Product​

• Do not turn off power while the product is operating. This may cause failure.
• Do not use outside temperature 0 degC to 40 degC and humidity 80% or less (no condensation).
• Do not use in places exposed to water or moisture.
• Do not use in dusty places.
• Do not use where corrosive gas is present.
• Do not use in direct sunlight.
• Do not use near equipment that may generate electrical noise.
• Do not use in locations with excessive mechanical shock or constant vibration.
• Do not use in any environment unsuitable for precision electronic equipment.

---

Storage​

How to Store This Product​

• If not used for a long period, place the product in its original packaging box and store in a location without direct sunlight, at ambient temperature -10 degC to 40 degC, and humidity 80% or less (no condensation).

---

Disposal​

How to Dispose This Product​

• When disposing of this product, treat it as industrial waste and dispose of it in accordance with applicable laws and regulations.

---

Transportation​

How to Transport This Product​

• For transportation, use the original packaging box and cushioning materials, and ship as precision equipment. Insufficient packaging may cause damage during transport.

---

Cleaning​

How to Clean This Product​

• If the product becomes dirty, wipe it with a soft cloth. Do not use organic solvents (such as benzine) that may alter the product.