This page describes the CAN/CAN FD sample lineup and communication settings.
Lineup
| Type | Description |
|---|
| Monitor Program | Monitors the CAN bus and displays received frame logs (no frame transmission). |
| Simulation Program | Monitors the CAN bus, transmits preset frames, and displays TX/RX logs. |
Supported Samples by Development Environment
| Development Environment | Monitor Program | Simulation Program |
|---|
| G++ | O | O |
| Python | O | O |
Communication Settings Used in Sample Programs
| Item | Setting |
|---|
| Arbitration section | Baudrate | 500 kbps |
| Sample point | 80% |
| Payload section | Baudrate | 2 Mbps |
| Sample point | 80% |
| Termination resistor | Enabled |
Library Placement
Perform the following according to the type of library you use.
| Item | Description |
|---|
| Static library | Copy it to the same directory as the source code. |
| Dynamic library | Copy it to a path where OS libraries can be loaded. |