Skip to main content

Constant Definitions (CAN)

This section describes CAN-specific constant definitions used by this product.

Main APIs​

Definition List​

ItemConstant Name
CAN Error FlagMPX_CAN_ERRFLG_*
CAN Error InformationMPX_CAN_ERR_*
CAN Termination ResistorMPX_CAN_TERMINATE_*
CAN Operation ModeMPX_CAN_MODE_*
CAN Arbitration BaudrateMPX_CAN_PARAM_ABR_*
CAN Sample PointMPX_CAN_PARAM_SP_*
CAN Data BaudrateMPX_CAN_PARAM_DBR_*
CAN ProtocolMPX_CAN_PROTOCOL_*
CAN Bit Rate SwitchMPX_CAN_BRS_*
CAN Error BehaviorMPX_CAN_ERR_BEHAVIOR_*
CAN One-shot TransmissionMPX_CAN_ONESHOT_*
CAN Frame TypeMPX_CAN_FRAME_TYPE_*
CAN Slot Enable/DisableMPX_CAN_SLOT_*
CAN ID FormatMPX_CAN_IDE_*
CAN Remote Transmission RequestMPX_CAN_RTR_*
CAN Transmission Trigger TypeMPX_CAN_SIM_TRIGGER_*
CAN Increment Enable/DisableMPX_CAN_SIM_INC_*
CAN Slot Change Request InfoMPX_CAN_SLOT_REQ_*

Definition Details (CAN)​

CAN Error Flag​

Constant NameValueDescription
MPX_CAN_ERRFLG_FALSE0 (0x0)No error
MPX_CAN_ERRFLG_TRUE1 (0x1)Error present

CAN Error Information​

Constant NameValueDescription
MPX_CAN_ERR_NONE0 (0x0)No error
MPX_CAN_ERR_BUS1 (0x1)Bus error
MPX_CAN_ERR_WARN2 (0x2)Error warning
MPX_CAN_ERR_PASV4 (0x4)Error passive
MPX_CAN_ERR_BUSOFF8 (0x8)Bus-off start
MPX_CAN_ERR_BUSWAKE16 (0x10)Recovery from bus-off
MPX_CAN_ERR_OVERLOAD32 (0x20)Overload
MPX_CAN_ERR_BUSLOCK64 (0x40)Channel bus lock
MPX_CAN_ERR_ARBLOST128 (0x80)Arbitration lost
MPX_CAN_ERR_STAFF256 (0x100)Stuff error
MPX_CAN_ERR_FORM512 (0x200)Form error
MPX_CAN_ERR_ACK1024 (0x400)ACK error
MPX_CAN_ERR_CRC2048 (0x800)CRC error
MPX_CAN_ERR_RECEIVE4096 (0x1000)Recessive bit error
MPX_CAN_ERR_DOMINANT8192 (0x2000)Dominant error
MPX_CAN_ERR_DELIMITER16384 (0x4000)ACK delimiter error

CAN Termination Resistor​

Constant NameValueDescription
MPX_CAN_TERMINATE_DISABLE0 (0x0)No termination resistor
MPX_CAN_TERMINATE_ENABLE1 (0x1)Termination resistor enabled

CAN Operation Mode​

Constant NameValueDescription
MPX_CAN_MODE_LISTEN0 (0x0)Monitor mode (no ACK)
MPX_CAN_MODE_MONITOR1 (0x1)Monitor mode (with ACK)
MPX_CAN_MODE_SIM2 (0x2)Simulation mode
MPX_CAN_MODE_NONE255 (0xFF)No operation

CAN Arbitration Baudrate​

Constant NameValueDescription
MPX_CAN_PARAM_ABR_1M0 (0x0)1Mbps
MPX_CAN_PARAM_ABR_500K1 (0x1)500Kbps
MPX_CAN_PARAM_ABR_250K2 (0x2)250Kbps
MPX_CAN_PARAM_ABR_125K3 (0x3)125Kbps

CAN Sample Point​

Constant NameValueDescription
MPX_CAN_PARAM_SP_60P0 (0x0)60%
MPX_CAN_PARAM_SP_65P1 (0x1)65%
MPX_CAN_PARAM_SP_70P2 (0x2)70%
MPX_CAN_PARAM_SP_75P3 (0x3)75%
MPX_CAN_PARAM_SP_80P4 (0x4)80%
MPX_CAN_PARAM_SP_85P5 (0x5)85%

CAN Data Baudrate​

Constant NameValueDescription
MPX_CAN_PARAM_DBR_5M0 (0x0)5Mbps
MPX_CAN_PARAM_DBR_4M1 (0x1)4Mbps
MPX_CAN_PARAM_DBR_2M2 (0x2)2Mbps
MPX_CAN_PARAM_DBR_1M3 (0x3)1Mbps
MPX_CAN_PARAM_DBR_500K4 (0x4)500Kbps

CAN Protocol​

Constant NameValueDescription
MPX_CAN_PROTOCOL_CAN0 (0x0)CAN
MPX_CAN_PROTOCOL_CANFD1 (0x1)CAN-FD

CAN Bit Rate Switch​

Constant NameValueDescription
MPX_CAN_BRS_DISABLE0 (0x0)BRS disabled
MPX_CAN_BRS_ENABLE1 (0x1)BRS enabled

CAN Error Behavior​

Constant NameValueDescription
MPX_CAN_ERR_BEHAVIOR_ACTIVE0 (0x0)Error active
MPX_CAN_ERR_BEHAVIOR_PASSIVE1 (0x1)Error passive

CAN One-shot Transmission​

Constant NameValueDescription
MPX_CAN_ONESHOT_DISABLE0 (0x0)One-shot disabled
MPX_CAN_ONESHOT_ENABLE1 (0x1)One-shot enabled

CAN Frame Type​

Constant NameValueDescription
MPX_CAN_FRAME_TYPE_PERIODIC0 (0x0)Periodic transmission
MPX_CAN_FRAME_TYPE_PERIODIC_TRIGGER1 (0x1)Start periodic transmission by event
MPX_CAN_FRAME_TYPE_EVENT2 (0x2)Event transmission
MPX_CAN_FRAME_TYPE_EVENTPERIODIC3 (0x3)Event-periodic transmission

CAN Slot Enable/Disable​

Constant NameValueDescription
MPX_CAN_SLOT_DISABLE0 (0x0)Slot disabled
MPX_CAN_SLOT_ENABLE1 (0x1)Slot enabled

CAN ID Format​

Constant NameValueDescription
MPX_CAN_IDE_STD0 (0x0)Standard ID
MPX_CAN_IDE_EXT1 (0x1)Extended ID

CAN Remote Transmission Request​

Constant NameValueDescription
MPX_CAN_RTR_DATA0 (0x0)Data frame
MPX_CAN_RTR_REMOTE1 (0x1)Remote frame

CAN Transmission Trigger Type​

Constant NameValueDescription
MPX_CAN_SIM_TRIGGER_USER0 (0x0)User-specified
MPX_CAN_SIM_TRIGGER_CAN1 (0x1)Reception of specified CAN ID
MPX_CAN_SIM_TRIGGER_CANFD2 (0x2)Reception of specified CAN FD ID

CAN Increment Enable/Disable​

Constant NameValueDescription
MPX_CAN_SIM_INC_FALSE0 (0x0)No increment
MPX_CAN_SIM_INC_TRUE1 (0x1)Increment enabled

CAN Slot Change Request Info​

Constant NameValueDescription
MPX_CAN_SLOT_REQ_NONE0 (0x0)No transmission trigger, no data rewrite
MPX_CAN_SLOT_REQ_DATA1 (0x1)No transmission trigger, data rewrite
MPX_CAN_SLOT_REQ_TRG2 (0x2)Transmission trigger, no data rewrite
MPX_CAN_SLOT_REQ_DATA_TRG3 (0x3)Transmission trigger and data rewrite

Supplementary Information​

Baudrate and Sample Point in CAN/CAN FD Protocol​

In CAN/CAN FD protocol, available sample points depend on the combination of arbitration baudrate and data baudrate.

BaudrateArbitration Sample PointData Sample Point
ArbitrationData60%65%70%75%80%85%60%65%70%75%80%85%
125kbps500kbps○○○○○○○○○○○○
1Mbps○○○○○○○○
2Mbps○○○○○
250kbps500kbps○○○○○○○○○○○○
1Mbps○○○○○○○○○○○○
2Mbps○○○○○○○○○
4Mbps○○○○○
5Mbps○○○
500kbps500kbps○○○○○○○○○○○○
1Mbps○○○○○○○○○○○○
2Mbps○○○○○○○○○
4Mbps○○○○○○○○○
5Mbps○○○○○○○
1Mbps500kbps○○○○○○○○○
1Mbps○○○○○○○○○○○○
2Mbps○○○○○○○○○
4Mbps○○○○○○○○○
5Mbps○○○○○○○

Combinations with arbitration baudrate 125kbps and data baudrate 4Mbps or 5Mbps are not configurable.